Removing The Ribbon Access Door; Opening The Printer - Intermec 4400 User Manual

10
C o d e 3 9
NugFont
Routine Maintenance
HelvC

Removing the Ribbon Access Door

To open the printer without power, it is necessary to remove the ribbon access
door.
To remove the ribbon access door
1. Turn off and unplug the printer.
2. Remove the Ribbon Access Door by turning the knob 1/4 turn
counterclockwise, and lifting the door away from the printer.
4400-27B

Opening the Printer

1. Press down on the manual cover release and lift the cover.
2. Remove the media and thermal transfer ribbon.
10-5