IBM Language Translation, Enable or Disable
Purpose:
Turns the IBM language translation feature on or off.
Default:
n = 0
Syntax:
<SI>i n
n = 0
n = 1
Notes:
This feature allows IBM compatible characters to replace standard ASCII
characters based on the current printer language. This command overrides the
language translation that is based on the current printer emulation.
This command is effective as soon as it is executed.
Intercharacter Delay, Set
Purpose:
Sets the intercharacter delay equal to n in milliseconds. The intercharacter delay
is the time delay between characters in a message transmitted by the printer.
Default:
n = 0
Syntax:
<SYN> n
n must be a number from 0 to 9999 in milliseconds.
This command is effective upon execution.
Notes:
Label Rest Point, Adjust
Adjusts the point at which labels are presented for removal. Positions the gap
Purpose:
on the tear bar when using form feed. This command is used mostly for Self-
Strip and Cutter applications.
Default:
n = 0
Syntax:
<SI>f n
Notes:
The range for n is from -30 (furthest back) to +30 (furthest forward) in dot
increments.
NugFont
HelvC
Disable IBM translation.
Enable IBM translation.
C o d e 3 9
Printer Commands
7
7-37