Intermec 4400 User Manual page 143

NugFont
HelvC
Example 2 Command Descriptions (continued)
Command Description
l1075; Sets the length of the line in field 20 to 1075 dots.
w8; Sets the width to eight times the original size.
U21; Defines field 21 as a graphic field.
o50,610; Sets the origin of field 21 at (50,610).
c2; Determines that field 21 prints in font two.
h9; Sets the height to nine times the original size.
w9; Sets the width to nine times the original size.
H22; Defines field 22 as a human-readable field.
o220,600; Sets the origin of field 22 at (220,600).
c25; Determines that field 22 prints in font 25.
d3,ACE CORP.; Defines constant data for field 22.
k20; Sets the point size to 20.
H23; Defines field 23 as a human-readable field.
o220,670; Sets the origin of field 23 at (220,670).
c25; Determines that field 23 prints in font 25.
d3,ADDRESS Defines constant data for field 23.
3010;
k10 Sets the point size to ten.
H24; Defines field 24 as a human-readable field.
o220,710; Sets the origin of field 24 at (220,710).
c25; Determines that field 24 prints in font 25.
d3,FICTION Defines constant data for field 24.
USA;
k10; Sets the point size to ten.
B25; Defines field 25 as a bar code field.
o675,625; Sets the origin of field 25 at (675,625).
c0,0; Sets the bar code font to Code 39 with no check digit.
d0,20; Determines that the data for field 25 is entered during Print mode and its maximum
length is 20 characters.
i25; Determines an interpretation of bar code prints including start and stop characters.
h100; Determines that the bar code height is 100 dots.
p@; Clears all prefixes from the bar code field.
C o d e 3 9
Designing Labels and Using Commands
6
6-33