Intermec 4400 User Manual page 317

Printhead Resistance Test, 7-79
Reset Printer Configuration, 7-79
summary, 7-11
Transmit 12 Volt Supply Value, 7-79
Transmit 24 Volt Supply Value, 7-79
Transmit Ambient Temperature, 7-79
Transmit Label Taken Sensor Value, 7-79
Transmit Paper Path Open Sensor Value, 7-79
Transmit Printhead Resistance Values, 7-79
Transmit Printhead Temperature Sensor Value, 7-79
Transmit Reflective Sensor Value, 7-79
Transmit Transmissive Sensor Value, 7-79
Test and Service Mode, Enter, 7-4, 7-31
Test and Service Mode, Exit, 7-11
thermal transfer media, setting the media sensitivity
number, 4-17, 4-19
thermal transfer ribbon
changing, 4-12
loading, 4-13
thermal transfer ribbon supply hub, 1-6
thermal transfer ribbon takeup hub, 1-6
Top of Form, Set, 7-6, 7-44
trademarks, ii
translation enabled, international character sets, A-15
Transmit 12 Volt Supply Value, 7-79
Transmit 24 Volt Supply Value, 7-79
Transmit Ambient Temperature, 7-79
Transmit Configuration Parameters, 7-64
Transmit Error Code, 7-8, 7-60, 7-63
Transmit Font, 7-64
Transmit Format, 7-64
Transmit Label and Gap Length, 7-64
Transmit Label Taken Sensor Value, 7-79
Transmit Options Selected, 7-64
Transmit Page, 7-64
Transmit Paper Path Open Sensor Value, 7-79
Transmit Printhead Parameters, 7-64
Transmit Printhead Resistance Values, 7-79
Transmit Printhead Temperature Sensor Value, 7-79
Transmit Quantity and Batch Count, 7-64
Transmit Reflective Sensor Value, 7-79
Transmit Software Version Number, 7-64
Transmit Static RAM Usage, 7-64
Transmit Transmissive Sensor Value, 7-79
Transmit User-Defined Characters, 7-64
Transmit User-Defined Command Tables, 7-64
transmitting commands, 7-18
troubleshooting, 9-3
TTR or Direct Thermal, Select, 7-6, 7-44
Twinax interface, A-12
Type of Graphic, Font or Bar Code, Select, 7-9
U
UCC-128, 7-71
UDC fields, editing commands, 7-14
understanding error messages, 4-24
understanding label design components, 6-9
understanding the indicator lights, 3-4
units, 5-4
unpacking the printer, 1-3
UPC, A-7
UPC/EAN, 7-71
uploading formats, 6-4
User-Defined Character Field, Create or Edit, 7-8, 7-61
User-Defined Character, Clear or Create, 7-8, 7-60
User-Defined Characters, Transmit, 7-5, 7-31
user-defined command tables, 7-63
user-defined configuration test label, 5-16
User-Defined Font Character, Clear or Create, 7-9
User-Defined Font Character, Create, 7-62
User-Defined Font, Clear or Define Bitmap, 7-61
user-defined fonts, 6-12
downloading, 6-13
User-Defined Tables, Transmit, 7-4, 7-32
using print tests, 9-14
using printer memory, 6-23
using PrintSet software, 6-5
using selective transfer, 8-8
using the control panel, 3-3
using the operator keys, 3-5
using the printer command set, 6-5
using the X and Y forms adjust, 4-21
V
verifying printer communications, 2-14
using DOS, 2-15
W
Warm Boot, 7-4, 7-32, 7-63
warning, setting, 5-15
warnings, xviii
warranty information, xvii
width
changing magnification, 6-19
configuring for labels, 5-12
of labels, 5-6
Width of Line, Box, Bar or Character, Define, 7-9, 7-62
word processor, using to create ASCII characters, 6-6
working with fields, 6-18
X
X and Y forms adjust, using, 4-21
Z
zero slash, 5-4
I
Index
I-13