Intermec 4400 User Manual page 101

NugFont
HelvC
To set the media length
1. Start at the OFFLINE READY display. Press [MENU] and then press [ ] or
[ ] until the display shows:
OFFLINE
CONFIGURATION
2. Press [SELECT] and then press [ ] or [ ] until the display shows:
CONFIGURATION
MEDIA ALERT
3. Press [SELECT] and then press [ ] or [ ] until you see the command you
are changing, such as in the example shown below:
MEDIA ALERT
MEDIA LENGTH
4. Press [SELECT]. The display shows the current setting with a cursor under
the first digit, such as shown below:
MEDIA LENGTH
06000 INCHES*
5. Press [SELECT] until the cursor is under the next digit you want to change.
6. Press [ ] to increase the digit or [ ] to decrease the digit.
7. Repeat Steps 5 and 6 until the number is correct, and then press [ENTER].
Note: Pressing [SELECT] at the last digit moves the cursor to the first digit.
8. Press [CONTINUE] to return to the OFFLINE READY display.
To set the low media warning
1. Start at the OFFLINE READY display. Press [MENU] and then press [ ] or
[ ] until the display shows:
OFFLINE
CONFIGURATION
2. Press [SELECT] and then press [ ] or [ ] until the display shows:
CONFIGURATION
MEDIA ALERT
3. Press [SELECT] and then press [ ] or [ ] until you see the command you
are changing, such as in the example shown below:
MEDIA ALERT
MEDIA LENGTH
C o d e 3 9
Configuring the Printer
5
5-15