First Data Entry Field, Select
Purpose:
Uses the field pointer to select the lowest numbered data entry field that can
accept Print mode data.
Syntax:
<ACK>
Notes:
This command ensures that data will print in the field with the lowest number
if you do not want to specify a data field by its field number.
Font, Transmit
Purpose:
Uploads a font from the printer in the form of commands and data the printer
receives to create the font.
Default:
n = 0
Syntax:
<ESC>v n
n is the font ID number.
The range is from 0 to 25.
Notes:
The data is in 4400 advanced mode form. Each data byte represents 6 bits of the
font's bitmap.
A target printer to which the commands and data are sent remain in 4400
mode.
Form Feed
Purpose:
Feeds a label out to the next print point.
Syntax:
<FF>
Notes:
If self-strip is used, the printer feeds out one blank label to the self-strip bar,
skipping an entire label.
If batch operation is used with die cut label stock, the label moves to the tear
bar.
If continuous label stock is used, the label stock will move the end-of-print skip
distance.
NugFont
HelvC
C o d e 3 9
Printer Commands
7
7-25