Intermec 4400 User Manual page 314

4400 Bar Code Label Printer User's Manual
Print mode commands (continued)
Program Mode, Enter, 7-29
Program Number, Transmit, 7-29
Quantity and Batch Count, Transmit, 7-29
Quantity Count, Set, 7-29
Reset, 7-29
Start and Stop Codes (Code 39), Print, 7-30
Static RAM Usage, Transmit, 7-30
Status Dump, 7-30
Status Enquiry, 7-31
summary, 7-4
Test and Service Mode, Enter, 7-31
User-Defined Characters, Transmit, 7-31
User-Defined Tables, Transmit, 7-32
Warm Boot, 7-32
Print Pitch Label, 7-79
print quality, 9-18
adjusting image bands with print speed, 9-19
changing formats, 9-19
changing printhead pressure, 9-19
fine-tuning the dark adjust, 9-19
printhead aging, 9-21
selecting media, 9-18
setting the media sensitivity number, 9-18
troubleshooting, 9-5
using the printhead adjustment lever, 9-20
Print Quality Label, 7-79
Print Quality Label, Print, 7-11
print speed, A-3
adjusting with image bands, 5-11, 9-19
changing, 5-6
setting maximum, 8-12
Print Speed, Set, 7-6, 7-42
print tests, 9-14
printer
86XX emulation, 5-21
basic configuration settings, 5-3
choosing a location, 2-4
cleaning, 10-4
closing, 1-14, 4-5
communication problems, 9-6
configuring, 5-3
connectin g to a PC, 2-6
connecting for cloning, 8-5
connecting to a mainframe, 2-9
connecting to a network, 2-9
connecting to an AS/400, 2-9
connecting to your system, 2-5
emptying buffer, 4-24
error messages, 9-6
feeding media, 4-9
front view, 1-7
inspecting, 10-3
installing, 2-3
label configuration, 5-6
I-10
maintaining, 10-3
opening, 1-11, 10-5
opening with power off, 4-4
opening with power on, 4-3
operating, 4-3
operating environment, A-4
operating problems, 9-4
options, A-11
overview, 1-5
parts description, 1-6
power switch, 1-10
print quality problems, 9-5
rear view, 1-9
restoring default configuration, 5-19
specifications, A-3
troubleshooting, 9-3
turning on, 1-10
unpacking, 1-3
printer case, cleaning, 10-6
printer command set, using, 6-5
printer cover, 1-6
Printer Language, Select, 7-7, 7-42
printer memory, using, 6-23
printhead, 1-6
changing pressure, 5-6
cleaning, 10-6
printhead adjustment lever, 9-20
printhead aging, 9-21
Printhead Parameters, Transmit, 7-4, 7-28
printhead pressure, 5-8, 9-19
Printhead Pressure, Enable, 7-6
Printhead Pressure, Set, 7-43
printhead range, 5-4
printhead range percentage, See printhead test.
Printhead Resistance Test, 7-79
Printhead Resistance Test, Begin, 7-11
Printhead Resistance Values, Transmit, 7-11
printhead specifications, A-4
Printhead Temperature, Transmit, 7-11
printhead test, 5-4
adjusting, 5-9
adjusting range, 5-10
printhead range percentage, 5-9
using, 5-8
Printhead Test Fail, 7-66
Printhead Test Parameters, Set, 7-6, 7-43
Printing, 7-66
printing a configuration test label, 5-17
printing commands, 7-16
printing method, A-3
printing the configuration test label, 1-14
PrintSet software
using, 6-5
using to download bitmap fonts, 6-13
using to download user-defined fonts, 6-13