Field Decrement, Set; Field Increment, Set; Field, Select - Intermec 4400 User Manual

4400 Bar Code Label Printer User's Manual

Field Decrement, Set

Purpose:
Default:
Syntax:
Notes:

Field Increment, Set

Purpose:
Default:
Syntax:
Notes:

Field, Select

Purpose:
Default:
Syntax:
Notes:
7-24
Sets the field decrement value for the current field.
n = 1
<ESC>D n
The range for n is from 1 to 9999.
Field decrement values in data fields are decremented by n after each print.
An error code (22) is generated if the decrement value is out of range.
Sets the increment value for the selected field.
n = 1
<ESC>I n
The range for n is from 1 to 9999.
Field increment values in data entry fields are incremented by n after each
print.
An error code is generated if the increment value is out of range.
Selects a data field for entering or working with data.
n = 0
<ESC>F n or <ESC>F " name"
The range for n is from 0 to 199.
The parameter for this command may be either the field number or the field
name. It cannot be both. If neither are present, the printer defaults to 0.
If the field number is used, all following data is entered into field n. If the field
name is used, all following data is entered into all fields and in the current
format or page. The field name must be bracketed by quotation marks ("").
An error code (33) is generated if an invalid field number is entered.