Intermec 4400 User Manual page 140

4400 Bar Code Label Printer User's Manual
Example 2 Command Descriptions (continued)
Command Description
H5; Defines field five as a human-readable field.
o925,0; Sets the origin of field five at (925,0).
c25; Sets the font for field five to font 25.
d3,100; Defines the constant data for field five..
k40 Sets the point size to 40.
L6; Defines field six as a line field.
o750,10; Sets the origin for field six at (750,10).
f3; Rotates field six 270 degrees counterclockwise around the field origin.
l130; Sets the length of the line in field six to 130 dots.
w8; Sets the width of field six to eight times its actual width.
L7; Defines field seven as a line.
o35,140; Sets the origin for field seven at (35,140).
l1075; Sets the length of the line in field seven to 1075 dots.
w8; Sets the line width to 8 dots.
H8; Defines field eight as a human-readable field.
o40,165; Sets the origin of field eight at (40,165).
c25; Defines the font for field eight as font 25.
f3; Rotates field eight 270 degrees counterclockwise around the origin.
r1; Rotates the characters in field eight 90 degrees counterclockwise.
d3,Size; Defines the constant data for field eight.
k10; Sets the point size to ten.
H9; Defines field nine as a human-readable field.
o100,130; Sets the origin of field nine at (100,130).
c25; Defines the font for field nine as font 25.
d3,1"; Defines constant data for field nine.
k40; Sets the point size to 40.
H10; Defines field ten as a human-readable field.
o145,165; Sets the origin for field ten at (145,165).
f3; Rotates field ten 270 degrees counterclockwise around the origin.
r1; Rotates the characters in field ten 90 degrees counterclockwise.
6-30