Sending Formats, Fonts, Pages, And Graphics To The Receiver Printer; Sending Fonts, Pages, Formats, And Graphics - Intermec 4400 User Manual

4400 Bar Code Label Printer User's Manual
6. Press [SELECT]. The display shows:
The sender printer is now ready (its display shows RECEIVER but you scroll to
the sender choices in the following procedures). The procedures that follow
explain how to send data to the receiver printer. Follow the procedure for the
type of data you want to send.
Sending Formats, Fonts, Pages, and Graphics to the
Receiver Printer
You can send as many formats, fonts, pages, and graphics to the receiver
printer from the sender printer as you need, either all at once or only selected
items. Before performing any of the following procedures, you must have
prepared both the sender and receiver printers.

Sending Fonts, Pages, Formats, and Graphics

This procedure explains how to send different combinations of pages, formats,
fonts, and graphics.
To download fonts, pages, formats, and graphics
1. On the sender, press [ ] or [ ] until the display shows:
2. Press [SELECT]. The display shows:
3. Press [ENTER] to download the data to the receiver. While downloading
4. When the downloading process is complete, the display on the sender
5. On the receiver printer, press [ONLINE/OFFLINE] to show the ONLINE
8-10
SELECTIVE TRANS
RECEIVER
SELECTIVE TRANS
SEND ALL
SEND ALL
EXECUTE TEST
the display shows:
TRANSFERRING
shows the following:
SEND ALL
EXECUTE TEST
READY display. The transfer is now complete. You can detach the receiver
and prepare another printer to receive the data.