Intercharacter Space For Udf, Define; Interpretive Field, Edit; Interpretive Field, Enable Or Disable - Intermec 4400 User Manual

4400 Bar Code Label Printer User's Manual
Human-Readable Text, Define Border Around (continued)
Notes: When n is greater than 0, the field prints white letters with an n dot size border
surrounding the field.

Intercharacter Space for UDF, Define

Purpose: Defines the intercharacter gap length for a user-defined bitmap font.
Intercharacter gap length is defined by the number of dot increments n.
Default: n = 2
Syntax:
z n
n values can range between 0 and 199.
Notes: An error code (52) is generated for invalid lengths.

Interpretive Field, Edit

Use this command to edit an interpretive field.
Purpose:
Syntax:
I n
n is the ID number of the corresponding bar code field. The range is from 0 to
199.
Notes: n is the field ID number of the bar code field to be interpreted. Interpretive
fields cannot be created with this command; they can only be created or deleted
with the i command when editing the corresponding bar code field.

Interpretive Field, Enable or Disable

Determines if the interpretive field of the current bar code field prints.
Purpose:
n = 0
Default:
Syntax:
i n
n = 0
n = 1
n = 2
Notes: When enabled, the human-readable information in font 0 (7x9 std) is printed 2
dots below the bar code field, left justified.
7-56
Disables the interpretive field.
Enables the interpretive field with start and stop characters.
Enables the interpretive field without start or stop characters.