Bar Code Field, Create Or Edit; Bitmap Cell Height For Graphic Or Udf, Define - Intermec 4400 User Manual

4400 Bar Code Label Printer User's Manual

Bar Code Field, Create or Edit

Use this command to edit or create a bar code field n.
Purpose:
n = 0
Default:
Syntax:
B n [, name ]
n values can range between 0 and 199.
,name is optional. The field can be up to eight ASCII characters, but cannot start
with a numeric character.
Notes: Parameters for the default field:
Field origin
Field direction
Bar code
Check digits
Prefix
Ratio
Interpretive
Height magnification
Width magnification
Data origin
Data length

Bitmap Cell Height for Graphic or UDF, Define

Purpose: Defines the height of a graphic or user-defined font.
Default: n = 1
n = 10
Syntax:
y n
n values can range between 1 and 600.
n is the number of rows for a graphic or font (bitmap). For outline fonts, n
represents the height of the base character in number of dots.
Notes: An error code (52) is generated for an invalid height.
7-46
0,0
0 degrees
Code 39
disabled
one
3 to 1
disabled
50
1
Print mode
20
Bitmap fonts and graphics
Outline fonts