Number of Image Bands, Set
Purpose:
Selects the number of image bands.
Default:
n = 3
Syntax:
<SI>I n
n must be a number from 2 to 10 if you have 512K of RAM in the printer.
Notes:
This command is effective upon execution.
Online or Offline on Power Up
Purpose:
Selects the printer to be online or offline when it is turned on.
Default:
n = 0
Syntax:
<SI>O n
n = 0
n = non-zero
Notes:
To make this command effective, reset the printer or cycle the power after
issuing the command.
Postamble, Set
Purpose:
Sets the postamble character to n.
Default:
n = <NUL>
Syntax:
<EOT> n
When n = <NUL>, no postamble character is sent. n can be any ASCII
character.
Notes:
This command is effective upon execution.
Preamble, Set
Purpose:
Sets the preamble character equal to n.
n = <NUL>
Default:
Syntax:
<SOH> n
When n = <NUL>, no preamble character is sent. n can be any ASCII character.
NugFont
HelvC
Printer is online on power up.
Printer is offline on power up.
C o d e 3 9
Printer Commands
7
7-41