Downloading Sender Ram To The Receiver - Intermec 4400 User Manual

6. Press [SELECT]. The display shows:
CLONING
SENDER
7. Press [SELECT] again. The display shows:
SENDER
EXECUTE TEST
Leave this display on the printer, which is now designated as the sender. You
are now ready to download the contents to the receiver printer.

Downloading Sender RAM to the Receiver

Once you have designated the receiver and sender printers, you can download
the RAM contents from the sender printer to the receiver printer.
Note: You will erase any data stored in the receiver's memory when you clone from the
sender printer.
To download the sender RAM to the receiver
1. The display on the sender printer shows:
SENDER
EXECUTE TEST
2. Press [ENTER] to start downloading the RAM contents to the receiver.
During downloading, the display shows:
TRANSFERRING
3. When the downloading process is complete, the sender printer shows:
SENDER
EXECUTE TEST
4. The receiver printer's display shows:
CLONING
RECEIVER
Cloning is now complete. Disconnect the cable from the receiver. To clone
another printer, designate the new printer as the receiver, attach it to the
sender, and press [ENTER] on the sender.
Special Procedures
8
8-7