About Printer Installation - Intermec 4400 User Manual

You can connect the 4400 printer to almost any system available and establish
communications. Use this chapter for:

About Printer Installation

The Intermec 4400 printer is designed to operate in a wide range of
environments and you can configure it to meet the printing requirements of
almost any data collection system. You can connect it directly to a host
computer or integrate it into a large data collection network through a port
concentrator or controller. The printer can run in either point-to-point or Multi-
Drop network configurations. It can also run from a remote location through a
dedicated modem.
The printer's default communications parameters are suitable for most serial
point-to-point installations but can easily be changed if they do not meet the
requirements for your system.
To install the printer, you may want to perform some or all of the following
procedures:
NugFont
HelvC
preparing for installation.
connecting the printer to your system.
configuring the serial port.
verifying printer communications with your system.
Assemble and set up the printer
Determine the appropriate configuration
Connect the printer to the host computer
Configure the main port
Set security levels
C o d e 3 9
Installing the Printer
2
2-3