Intermec 4400 User Manual page 316

4400 Bar Code Label Printer User's Manual
security levels (continued)
setting, 8-3
Select 4400 Mode, 7-64
Select 86XX Emulation Mode, 7-64
Select Field, 7-64
Select First Data Entry Field, 7-63
Select Format, 7-64
Select key, 3-6
Select Label Stock Type, 7-65
Select Next Data Entry Field, 7-63
Select Page, 7-64
Select Printer Language, 7-65
Select TTR or Direct Thermal, 7-65
selecting media, 9-18
selection keys
[CONTINUE], 3-6
[ENTER], 3-6
[MENU], 3-6
[SELECT], 3-6
using to access menus, 3-6
selective transfer, 8-8
connecting printers, 8-8
preparing the receiver printer, 8-9
preparing the sender printer, 8-9
self-strip, 5-4, A-11
using label rest point, 4-23
commands, 7-19
Self-Strip, Enable or Disable, 7-7, 7-44
semicolon, command terminator, 6-18
semicolon, using in commands, 7-45
sensitivity, See media sensitivity number.
serial communications port connector, 1-8
serial port
changing default settings, 2-13
configuring, 2-12
using to connect a PC to the 4400, 2-6
Service menu, 3-7
Set Batch Count, 7-63
Set Control Panel Access Permission, 7-65
Set Dark Adjust, 7-65
Set End-of-Print Skip Distance, 7-65
Set Field Decrement, 7-64
Set Field Increment, 7-64
Set Inter-Character Delay, 7-63
Set Label Retract Distance, 7-65
Set Label Width, 7-65
Set Maximum Label Length, 7-65
Set Message Delay, 7-64
Set Number of Image Bands, 7-65
Set Postamble, 7-63
Set Preamble, 7-63
Set Print Speed, 7-65
Set Printhead Test Values, 7-65
Set Quantity Count, 7-63
Set Top of Form, 7-65
I-12
set warning,setting, 5-14
setting a security level, 8-3
setting maximum print speed, 8-12
setting the dark adjust, 4-20
setting the media alert, 5-14
setting the media sensitivity number, 4-16
shift print commands, 7-65
Silicon Software, ii
situating the printer, 2-4
six bits per byte graphics, 6-16
Skipping, 7-66
software drivers, 8-14
Source of Field Data, Define, 7-9
specifications
character sets, A-5
communications, A-5
dimensions, A-3
electrical requirements, A-3
environment, A-4
fonts, A-5
graphics, A-5
media, A-4
power usage, A-3
print speed, A-3
printhead, A-4
printing method, A-3
ribbon, A-4
speed, See print speed.
Start and Stop Codes (Code 39), Print, 7-4, 7-30
Static RAM Usage, Transmit, 7-5, 7-30
Status Dump, 7-5, 7-30, 7-63
Status Enquiry, 7-4, 7-8, 7-31, 7-63
status responses, 7-66
stop bits, 2-12
storing label formats, 6-22, 6-23
straight through DTE to DCE cable, 2-10
symbologies, See bar codes.
syntax errors, 9-12
system commands, 7-15
T
tables, downloading user-defined commands, 7-63
Takeup Reel Full, 7-66
tear bar, 1-6
cleaning, 10-7
technical support
Canadian phone number, ii
US phone number, ii
terminal emulation, using ASCII control characters, 6-8
terms used in this manual, xix
Test and Service mode commands, 7-19
descriptions, 7-79
Exit Test and Service, 7-79
Print Pitch Label, 7-79
Print Quality Label, 7-79