Program Mode, Enter
Purpose:
Causes the printer to enter Program mode for the purpose of editing pages,
formats, fonts, or graphics.
Syntax:
<ESC>P
Notes:
All previously entered data is lost upon execution of this command.
Program Number, Transmit
Purpose:
Transmits both the program number and the version number.
Syntax:
<ESC>M
Notes:
This command uploads the program and software version number to the host
as an ASCII alphanumeric character string.
Example: 012345ver1.4.
Quantity and Batch Count, Transmit
Purpose:
Uploads the remaining quantity and batch counts for the current print job.
Syntax:
<ESC>Q
Quantity Count, Set
Purpose:
Sets the quantity of label batches to be printed by the next print command.
Default:
n = 1
Syntax:
<RS> n
The range or n is from 1 to 9999.
Notes:
An error code is generated if the quantity is out of range.
Incrementing and decrementing of data occurs between label batches.
Reset
Purpose:
Executes a printer power up reset immediately.
Syntax:
<DLE>
Notes:
All data and commands in the input buffer are erased upon reset.
NugFont
HelvC
C o d e 3 9
Printer Commands
7
7-29