Intermec 4400 User Manual page 51

Example of Using DOS to Verify Printer Communications
1. At the DOS prompt, type the following command and press Enter to
2. Type the following command lines and press Enter:
NugFont
HelvC
configure the serial port:
MODE COM1 96,E,7,1,N
COPY CON COM1
ABCDEF^Z
where:
COPY CON COM1 tells the PC to copy the next line of information to
communications port COM1.
ABCDEF are random characters typed at the host.
^Z (Ctrl-Z) sends the information to the printer.
The printer prints the following characters:
Note: If you are using a different platform to communicate with your printer,
please refer to your system user's manual for information on downloading
commands.
C o d e 3 9
Installing the Printer
4400U.012
2
2-15