Field Origin, Define; Font, Select Type; Font Character Width, Define - Intermec 4400 User Manual

Field Origin, Define

Purpose: Defines the origin for a field. The field origin is the upper left corner of the
field. Horizontal n and vertical m locations represent the number of dot
increments from the label's origin. The origin (0,0) is the upper left square on
the label.
Default: n = 0
m = 0
Syntax:
o n , m
n values can range between 1 and 19999
,m values can range between 1 and 19999.

Font, Select Type

Purpose: Selects a font type for human-readable fields.
Default: n = 0
Syntax:
c n [, m1 ][, m2 ][, m3 ]
For human-readable fields, n values can range between 0 and 41.
Modifiers apply only to bar code symbologies. Fonts and bar codes are listed at
Notes:
the end of the Program mode command descriptions.

Font Character Width, Define

Purpose: Defines the amount of space from the origin of one letter to the origin of the
next. If n is too small characters may overlap.
Character's bitmap width, minus the font character offset (Xn) plus the
Default:
intercharacter space (zn).
Syntax:
Z n
n values can range between 0 and 599.
Notes: For bitmap characters only.
NugFont
HelvC
C o d e 3 9
Printer Commands
7
7-51