Intermec 4400 User Manual page 216

4400 Bar Code Label Printer User's Manual
Bar Codes (continued)
c7,0 ,m2
c7,1 ,m2
c7,2 ,m2
c7,3 ,m2
c8,m1,m2
c8,0
c8,1
c8,2,m2
c8,3
c8,4
c8,5,m2
c8,6
c9
c10
c11
7-72
The flag 1 option only applies to EAN 8, EAN 13, and UPC version A. For EAN
13, enabling the flag 1 option prints the first character of the bar code
interpretive. For EAN 8 and UPC version A, enabling the flag 1 option moves
the first and last character of the bar code interpretive outside of the guard
bars.
Select UPC/EAN Codes. Printer enters check digit and flag 1 enable.
Select UPC/EAN Codes. Printer enters check digit and flag 1 disabled.
Select UPC/EAN Codes. Host enters check digit and printer verifies. Flag 1
enabled.
Select UPC/EAN Codes. Host enters check digit and printer verifies. Flag 1
disabled.
Use ,m2 to select the UPC/EAN codes listed below. Default is 0.
0
variable length
1
EAN 8
2
EAN 13
3
UPC Version A
4
UPC Version E
5
UPC Version D1
6
UPC Version D2
7
UPC Version D3
8
UPC Version D4
9
UPC Version D5
Selects HIBC Code 39 with ,m1 as shown below. Default for ,m1 is 0.
The next three modifiers conform to Supplier Standard:
Selects HIBC Code 39. Primary format.
Selects HIBC Code 39. Alternate primary format.
Selects HIBC Code 39. Secondary format. The linkage character comes from
,m2 (which is the field identifier).
The next four modifiers conform to Provider Standard:
Single format.
First data format.
Selects HIBC Code 39. Second data format. The linkage character comes from
,m2 (which is the field identifier).
Selects HIBC Code 39. Multiple data format.
Selects Code 16K.
Selects Code 49.
Selects POSTNET.