Configuring The Printer From The Home Page - Intermec PD41 Manual

Chapter 3 — Configuring the Printer

Configuring the Printer From the Home Page

42
SETUP:
SERIAL-COM
SETUP:
DATE TIME
SETUP:
CHARSET
SETUP:
PRINT DEFS
The Main Nodes of the Setup Menu in ESim
If you are using an Ethernet or 802.11 wireless connection, you can
change configuration settings from the home page of the printer.
Note: You should have already connected your printer to your
network and obtained an IP address. If not, see
Printer to Your Network" on page
To access the home page of the printer
1 Start your web browser.
2 In the address field, type the IP address of your printer and press
Enter. The home page of your printer appears.
The home page displays the assigned name, firmware version,
Active Command Set, MAC address, and IP address of your
printer. The home page also displays the contents of the image
buffer, as well as the status of the Ready-to-Work indicator.
3 Click Configuration.
Starting point
SETUP:
NET-COM, NET1
SETUP:
MEDIA
24.
PD41 and PD42 Commercial Printer User's Manual
SETUP:
COM
SETUP:
NETWORK
SETUP:
FEEDADJ
"Connecting the