Printing A Configuration Test Label - Intermec 4400 User Manual

NugFont
HelvC

Printing a Configuration Test Label

1. Start at the OFFLINE READY display.
2. Press [MENU] and then press [ ] or [ ] until the display shows:
OFFLINE
SERVICE MENU
3. Press [SELECT] to enter the Service menu. Then press [ ] or [ ] until the
display shows:
SERVICE MENU
PRINT CONFIG
4. Press [SELECT]. The display shows:
PRINT CONFIG
USER DEFINED
5. Press [ ] or [ ] to scroll from the user-defined label to the Hardware label.
Press [SELECT] when the display shows the label you want to print.
6. The display shows EXECUTE TEST. Press [ENTER] to print the
Configuration Test Label. Both types of labels are shown on the next page.
Note: For 4400 printers with a 6.5 mil printhead, the Label Width is 672 dots, and the
dot size is 6.5 mil.
C o d e 3 9
Configuring the Printer
5
5-17