Bar Codes - Intermec 4400 User Manual

4400 Bar Code Label Printer User's Manual

Bar Codes

The following table accompanies the command description for Select Type of
Graphic, Font, or Bar Code (cn[,m1][,m2][,m3]) for selecting bar codes.
The bar codes listed below may be selected as shown. Optional modifiers are
denoted by m.
Bar Code Selection
c0 ,m
c0,0
c0,1
c0,2
c0,3
c0,4
c0,5
c0,6
c0,7
c0,8
c1
c2 ,m
c2,0
c2,1
c2,2
c3 ,m
c3,0
c3,1
c4 ,m
c4,0
c4,1,x,y
7-70
Bar Code Description
Selects Code 39. Select m to specify parameters as listed below. The default for
m is 0.
Selects 8646 compatible Code 39. No check digit.
Selects 8646 compatible Code 39. Printer enters check digit.
Selects 8646 compatible Code 39. Host enters check digit and printer verifies.
Selects full ASCII Code 39. No check digit.
Selects full ASCII Code 39. Printer enters check digit.
Selects full ASCII Code 39. Host enters check digit and printer verifies.
Selects 43 character Code 39. No check digit.
Selects 43 character Code 39. Printer enters check digit.
Selects 43 character Code 39. Host enters check digit and printer verifies.
Selects Code 93.
Selects Interleaved 2 of 5. Select m to specify parameters as listed below. The
default for m is 0.
No check digit.
Printer enters check digit.
Host enters check digit and printer verifies.
Selects Code 2 of 5. Select m to specify parameters as listed below. The default
for m is 0.
Selects 3-bar start/stop code.
Selects 2-bar start/stop code.
Selects Codabar. Select m to specify parameters as listed below. Default for m is
0.
Host enters start/stop codes and printer verifies.
Printer enters start code x and stop code y. x and y can range from A to D.