Adjusting The Edge Guides - Intermec 4400 User Manual

NugFont
HelvC

Adjusting the Edge Guides

1. Push the tab on the outside edge guide in until the inside edge just touches
the edge of the media.
2. Make sure that the media does not pinch or buckle in the label path.
3. Close the printer.
4. If you have opened a new box of media, be sure to check the media
sensitivity rating. See "Setting the Media Sensitivity Number" later in this
chapter. If the sensitivity rating is correct, the printer is now ready to print.
C o d e 3 9
Operating the Printer
4
4400-56B
4-11