Unpacking The Printer; Checking The Order For Completeness - Intermec 4400 User Manual

This chapter contains a brief introduction to the components of your printer and
provides procedures for loading media and printing a configuration test label that
shows the printer's current configuration.
If you have followed the procedures in the Getting Started Guide for printing a
configuration test label, then you can proceed with installation, which is described in
Chapter 2.

Unpacking the Printer

1. Unpack the printer and put it on a clean stable surface for testing.
2. Store the shipping container and materials in case you need to ship the
3. Check the order for completeness.
4. Report any damage or defects.

Checking the Order for Completeness

Verify the contents of the shipping container against the list below. Use the
figure on the following page to help identify these items.
Verify your order against the packing slip to ensure that your order is
complete. If any parts are missing, please contact your local Intermec
representative.
NugFont
HelvC
printer for any reason.
4400 bar code label printer
AC power cord
Media roll holder
Media Envelope
4400 Bar Code Label Printer Getting Started Guide
C o d e 3 9
Getting Started
1
1-3