Format, Create Or Edit; Format Data In A Page, Define Source - Intermec 4400 User Manual

4400 Bar Code Label Printer User's Manual

Format, Create or Edit

Use this command to edit or create a format n.
Purpose:
Syntax:
A n [, name ]
n is the format ID number. Values can range between 1 and 19.
,name is an optional field. The field can be up to eight ASCII characters, but
cannot start with a numeric character.
Notes: An error code is generated if the format number is out of range.
Format, Create or Edit
Purpose: Use this command to edit or create a format n.
Syntax:
F n [ ,name ]
n is the format ID number. Values can range between 1 and 19.
,name is an optional field. The field can be up to eight ASCII characters, but
cannot start with a numeric character.
Notes: An error code is generated if the format number is out of range.

Format Data in a Page, Define Source

Purpose: Defines a data source for a format assigned to a page position.
Default: n = 0
m1 = a
m2 = 0
Syntax:
e n [, m1 ][, m2 ];
e0;
The format receives its data during Print mode.
e1[,m1][,m2];
The format is a slave of another format within this page.
,m1 is the position of the master format within the page. The default is a.
,m2 is the data offset to apply to the slave format. The default is 0. Only data
delimited by numeric field separator <FS> or alphanumeric field separator
<GS> can be offset.
Notes: The format ID must be the same for both the master and slave formats.
7-52