4400 Bar Code Label Printer User's Manual
Program Mode, Exit
Instructs the printer to exit Program mode and enter Print mode. Any format
Purpose:
or page currently being edited is saved.
Syntax:
R
Reset
Purpose:
Causes the printer to immediately perform a power up reset. All data and
commands in the buffer are lost, even if they are entered prior to the reset
command.
Syntax:
<DLE>
Transmit Error Code
Purpose:
The printer sends an ASCII number representing the latest host command
syntax or printer RAM usage error.
Syntax:
<BEL>
Notes:
A table containing descriptions of each error code follows the Program mode
command descriptions.
User-Defined Character, Clear or Create
Purpose:
This is the command to clear or create a graphic bit map.
Syntax:
G n [, name ]
n values can range between 0 and 99.
,name is an optional field. The field can be up to eight ASCII characters except
for semicolon, but cannot start with a numeric character.
Notes:
If graphic n has already been defined, it is erased and redefined.
7-60