Using The Print Tests - Intermec 4400 User Manual

4400 Bar Code Label Printer User's Manual

Using the Print Tests

If you are changing your label formats, there are several tests that print out
formats, pages of formats, graphics, and fonts that are currently stored in the
printer's memory. These tests are useful for reviewing your design options.
The following table shows the available print tests for pages, formats, fonts,
and graphics. See the circle on the foldout page to locate these tests in the
Service menu.
Command
Print Page
Print Formats
Print Fonts
Print Graphics
Use the following procedure to print examples of any page, format, font, or
graphic, as shown in the preceding table. You can also print all examples of
any item if you wish. For pages and formats, you are prompted to select a
quantity before executing the test (unless you chose all pages or all formats).
This quantity is the number of copies you want of the chosen page or format.
To print tests
1. Start at the OFFLINE READY display.
2. Press [MENU]. Then press [ ] or [ ] until you reach the Service menu as
3. Press [SELECT] to enter the Service menu. Press [ ] or [ ] until the display
4. Press [SELECT]. The first page you define appears in the display. For
9-14
Selections
Print 1 to 99 copies of any page number (0 through 9), or print
all pages.
Print 1 to 99 copies of any format number (0 through 19), or
print all formats.
Print any font number (0 through 25), or print all fonts.
Print any graphic number (0 through 99), or print all graphics.
shown below:
OFFLINE
SERVICE MENU
shows the item you want to print (in this example you are printing a page).
SERVICE MENU
PRINT PAGE
example, if the first page defined is page 1, the display shows the
following:
PRINT PAGE
1