Intermec 4400 User Manual page 141

NugFont
HelvC
Example 2 Command Descriptions (continued)
Command Description
c25; Sets the font for field ten to be font 25.
d3,3/4; Defines constant data for field ten.
h16; Sets the height to sixteen times the original size.
w65; Sets the width to 65 times the original size.
L11; Defines field 11 as a line field.
o310,140; Sets the origin for field 11 at (310,140).
f3; Rotates field 11 270 degrees counterclockwise around the origin.
l130; Sets the length of the line in field 11 to 130 dots.
w8; Sets the width to eight times the original size.
L12; Defines field 12 as a line field.
o35,270; Sets the origin of field 12 at (35,270).
l275; Sets the length of the line in field 12 to 275 dots.
w8; Sets the width of field 12 to eight times its actual width.
H13; Defines field 13 as a human-readable field.
o60,560; Sets the origin of field 13 at (60,560).
f1; Rotates field 13 90 degrees around the origin 25.
c25; Determines that field 13 prints in font 25.
d0,20; Specifies that data for field 13 will be entered during Print mode and that the data will
be a maximum of 20 characters long.
k10; Sets the point size to ten.
L14; Defines field 14 as a line field.
o170,270; Sets the origin of field 14 at (170,270).
f3; Rotates field 14 270 degrees counterclockwise around the origin.
l310; Sets the length of the line in field 14 to 310 dots.
w8; Sets the width of field 14 to eight times the actual size.
H15; Defines field 15 as a human-readable field.
o350,140; Sets the origin of field 15 at (350,140).
c25; Determines that the field prints in font 25.
d3,DUPLEX Defines constant data for field 15.
ANGLE
CONNECTOR;
h70; Sets the height to 70 times the original size.
C o d e 3 9
Designing Labels and Using Commands
6
6-31