Replacing The Fuse - Intermec 4400 User Manual

Replacing the Fuse

If the Power light does not come on when you turn on the printer, you need to
replace the main power fuse. You need the following items:
Warning
Always disconnect the power cord before replacing the fuse. Failure to
disconnect the power cord may result in injury or death due to electric shock.
Avertissement
Débranchez toujours le cordon d'alimentation avant de remplacer la fusible. Si
vous ne débranchez pas de cordon d'alimentation, vous courrez le risque de
blessure ou de mort par électrocution.
To replace the fuse
1. Turn off and unplug the printer.
2. With the screwdriver, turn the fuse holder a 1/2 turn counterclockwise.
3. The spring-loaded fuse holder will pop out. Remove the fuse holder.
NugFont
HelvC
Fuse for 5A, 250V, Slo-Blo fuse, (either 3AG or 5x20mm)
Medium, straight slot screwdriver
C o d e 3 9
Routine Maintenance
10
4400-66B
10-11