Outline Font Description, Download; Outline User-Defined Font, Clear Or Create; Page, Create Or Edit - Intermec 4400 User Manual

4400 Bar Code Label Printer User's Manual

Outline Font Description, Download

Use this command to download an outline font description. All characters are
Purpose:
loaded at once; not individually as with bitmap fonts but since the maximum
message length is 255 characters, the data may have to be split between
successive j commands.
Syntax:
j nn....nn
Notes: The printer stores all incoming data into the font selected with the J command.
(See Jn, name, )
Example:
J4, font name;
x30;y30;
jAFB0...4E; (maximum 255 characters)
jB32C...FF; (maximum 255 characters)
The font information must be sent to the printer as a string of ASCII characters
in hexadecimal form. The printer expects two hex digit bytes for every eight-bit
byte of information. Data must be nibblized ASCII characters range from 0 to 9
and A to F.

Outline User-Defined Font, Clear or Create

Purpose: Selects an outline font to download.
Syntax:
J n [, name ]
n is the font ID number. n values can range from 3 to 6 and 8 to 19.
,name is an optional field. The field can be up to eight ASCII characters, except
for semicolon.
Notes: If font n has already been defined, the font is erased and redefined.

Page, Create or Edit

Purpose: Use this command to edit or create a page.
Syntax:
S n
n is the numeric page ID. Values for n can range between 1 and 9.
Notes: The default page cannot be edited. An error code is generated if a page number
is out of range.
7-58