Intermec 4400 User Manual page 91

NugFont
HelvC
To change the default values
1. Start at the OFFLINE READY display (if necessary, press
[ONLINE/OFFLINE]).
2. Press [MENU]. Then press [ ] or [ ] until the display shows:
OFFLINE
CONFIGURATION
3. Press [SELECT]. The display shows:
CONFIGURATION
LABEL
4. Press [ ] or [ ] until the display shows:
CONFIGURATION
BASIC
5. Press [SELECT]. The display shows:
BASIC
CHARACTER SET
6. Press [ ] or [ ] to scroll through the available commands.
7. Press [SELECT] when you reach the command you want to change. The
display shows the current setting with an asterisk (*).
8. Press [ ] or [ ] to scroll through the available settings for the command.
9. When you see the setting you want, press [ENTER]. The asterisk (*)
appears next to the new setting, indicating it is now active.
10. Press [CONTINUE] to return to the OFFLINE READY display or, to change
other settings, press [MENU] and repeat Steps 6 through 9.
C o d e 3 9
Configuring the Printer
5
5-5