Opening The Printer With Power Off - Intermec 4400 User Manual

4400 Bar Code Label Printer User's Manual
Opening the Printer With Power On
4-4
OPEN

Opening the Printer With Power Off

1. Make sure the printer is turned off or the printer is unplugged.
2. Turn the knob on the Ribbon Access Door one quarter turn
counterclockwise, and then lift the door away from the printer.
3. Press down on the cover release and open the printer to expose the paper
path.
4. When you are ready to close the printer, replace the Ribbon Access Door.
Make sure that the grip on the knob is in the Open or vertical position.
Then position the door on the printer and press it into place, making sure it
seats evenly.
5. Lock the door into place by turning the knob 1/4 turn clockwise.
6. Close the paper path by pressing down on the cover until the latch catches.