About The Printer Menus; Accessing The Main Menu - Intermec 4400 User Manual

About the Printer Menus

The four menus in the Main menu divide the features of the printer into
categories described by the title of each menu. Use this table to locate the menu
you will use the most, based on the tasks you are performing with the printer.
Menu Description
Operator Used for setting media sensitivity and for
making fine adjustments to the darkness, print
alignment and cutoff point of your labels. This
menu can be accessed when the printer is
online or offline.
Install Select communication parameters and security
levels and install printer options. The printer
must be offline to access this menu.
Service Set and adjust operating features, calibrate
printer sensors, and test current settings. The
printer must be offline to access this menu.
Configuration Change the operating parameters and activate
or disable optional features. The printer must
be offline to access this menu.

Accessing the Main Menu

The selections for changing the printer settings are divided into four menus
that cover four different categories for maintaining and customizing your
printer. These four menus are listed in the Main menu, which is shown on page
3-9 as the first circle of menus from the center.
To access the Main menu
1. Make sure the printer is offline and the display shows:
2. Press [MENU]. The display shows:
3. Press [ ]. The display shows:
4. Continue pressing the [ ] and [ ] keys to scroll through the Main menus.
NugFont
HelvC
OFFLINE
READY
OFFLINE
OPERATOR MENU
OFFLINE
INSTALL MENU
o d e 3
Using the Control Panel
User
Operators who use the printer
daily.
Programmers, systems analysts,
or other personnel who install
and set up the printer
Technicians or other personnel
qualified to do repair and service.
Programmers, systems analysts,
or supervisors who program and
set up the commands for the
printer and label formats.
3
3-7