Intermec 4400 User Manual page 84

4400 Bar Code Label Printer User's Manual
4-22
-X
-Y
*FORMAT*
*FORMAT*
+Y
Direction of media from printer
You can adjust the print alignment on your labels without interrupting normal
label production. The following example uses the X Forms Adjust feature. The
procedure is performed the same way for the Y Forms Adjust feature.
Note: The x-dimension is also affected by the Top-of-Form configuration command.
For more information, see "Top-of-Form, Set" in Chapter 7.
To adjust the print alignment (example)
1. Start at the ONLINE READY display:
ONLINE
READY
2. Press [MENU] to enter the Operator menu. Press [ ] or [ ] until the display
shows:
OPERATOR MENU
X FORMS ADJUST
3. Press [SELECT]. The display shows the current X Forms Adjust setting
with an asterisk (*) as shown in the example below:
X FORMS ADJUST
4. Press [ ] to increase the number and move the print towards the back of the
printer. Press [ ] to decrease the number and move the print towards the
front of the printer.
+X
0*
4400B-138