Printing Pcl And Postscript Font Lists - Genicom microLaser 320 Installation Manual

1-26 microLaser 320 and 401 Installation Guide

Printing PCL and PostScript Font Lists

Printing PCL and PostScript Font Lists
Your printer has the capability of printing lists of all installed PCL or PostScript fonts. To print a Font List,
follow these steps:
1. From the Ready status, press MENU, the control panel display will read:
2. Press PREVIOUS or NEXT until the display reads:
3. Press SELECT, the display will read:
4. Press NEXT or PREVIOUS until the display reads:
5. Press SELECT, the display will read:
NOTE: You may toggle between PCL Fonts and Postscript Fonts using the PREVIOUS or NEXT
push-buttons.
6. Press SELECT. A multi page resident Font List will print. Examples of a PCL and PostScript Font
Lists appears in Appendix C of the
tronic Library for Non-impact Printers
Publication No. GEK-89496C
Menu
Paper Menu
Menu
Functions
Functions
Reset Printer
Functions
Print Fonts
Print Fonts
PCL Fonts
microLaser 320 and 401
CD-ROM.
Genicom
User's Guide located on the GENICOM Elec-
Jun 99