Presence <Pres; Fonts <Font - Polycom IP 320 Administrator's Manual

Attribute
dir.corp.autoQuerySubmitTimeout
dir.corp.sortCtrl
Presence <pres/>
Attribute
pres.reg
pres.idleSoftkeys
Fonts <font/>
Permitted
Values
0 to 60 seconds
0 or 1
The parameter pres.reg is the line number used to send SUBSCRIBE. If this
parameter is missing, the phone will use the primary line to send SUBSCRIBE.
Permitted
Values
positive
integer
0 or 1
These settings control the phone's ability to dynamically load an external font
file during boot up. Loaded fonts can either overwrite pre-existing fonts
embedded within the software (not recommended) or can extend the phone's
Default Interpretation
0 To control if there is a timeout after
the user stops entering characters
in the quick search and, if there is,
how long the timeout is.
If set to 0, there is not (disabled).
Null Controls how client makes queries
and does it sort entries locally. It
should not be used by users.
If set to 0 or Null, leave sorting as
negotiated between client and
server.
If set to 1, force sorting of queries.
Note: Polycom does not
recommend setting
dir.corp.sortCtrl to 1 as it
causes excessive LDAP queries. It
should be used to diagnose LDAP
servers with sorting problems only.
Default Interpretation
1 Specifies the line/registration
number used to send SUBSCRIBE
for presence. Must be a valid
line/registration number. If the
number is not a valid
line/registration number, it is
ignored.
Null If set to Null or 0, the presence idle
soft keys (MyStat and Buddies) do
not appear.
If set to Null or 1, the presence idle
soft keys appear.
Configuration Files
A - 91