Polycom IP 320 Administrator's Manual page 193

Attribute
voIpProt.SIP.
allowTransferOnProceeding
voIpProt.SIP.pingInterval
voIpProt.SIP.useContactInReferTo
voIpProt.SIP.serverFeatureControl.cf
voIpProt.SIP.serverFeatureControl.loc
alProcessing.cf
voIpProt.SIP.serverFeatureControl.
dnd
voIpProt.SIP.serverFeatureControl.
localProcessing.dnd
Permitted
Values Default
0 or 1 1
0 to 3600 0
0 or 1 0
0 or 1 Null
0 or 1 Null
0 or 1 Null
Interpretation
If set to 1, a transfer can be completed during
the proceeding state of a consultation call.
If set to 0, a transfer is not allowed during the
proceeding state of a consultation call.
If set to Null, the default value is used.
The number in seconds to send "PING"
message. This feature is disabled by default.
If set to 1, the Contact URI is used.
If set to 0, the TO URI is used (previous
behavior).
If set to 1, server-based call forwarding is
enabled. The call server has control of call
forwarding.
If set to 0 or Null, server-based call
forwarding is not enabled. This is the old
behavior.
If set to 0 and
voIpProt.SIP.serverFeatureControl.cf=
"1", the phone will not perform local Call
Forward behavior.
If set to 1 or Null, the phone will perform local
Call Forward behavior on all calls received.
If set to 1, server-based DND is enabled. The
call server has control of DND.
If set to 0 or Null, server-based DND is not
enabled. This is the old behavior.
If set to 0 and
voIpProt.SIP.serverFeatureControl.dnd
="1", the phone will not perform local DND
call behavior.
If set to 1 or Null, the phone will perform local
DND call behavior on all calls received.
Configuration Files
A - 13