Polycom IP 320 Administrator's Manual page 340

Administrator's Guide for the SoundPoint IP / SoundStation IP / VVX Family
Name
device.syslog.transport
device.syslog.facility
device.syslog.renderLevel
device.syslog.prependMac
device.em.power
device.net.etherVlanFilter
device.net.etherStormFilter
device.net.etherModeLAN
device.net.etherModePC
device.serial.enable
device.sec.SSL.certList
device.sec.SSL.customCert
device.net.lldpEnabled
device.prov.clinkEnabled
A - 160
Possible Values
None=0,
UDP=1,
TCP=2,
TLS=3
0 to 23
0 to 6
Enabled, Disabled
Enabled, Disabled, Null
Enabled, Disabled
Enabled, Disabled
-1 to 5
-1 to 5
0,1
all, custom, default
X.509 certificate
0 or 1
0 or 1 (default)
Description
The protocol that the phone will use to write to the
syslog server.
If set to "None", transmission is turned off, but the
server address is preserved.
A description of what generated the log message.
For more information, refer to section 4.1.1 of RFC
3165.
The default value is 16, which maps to "local 0".
Specifies the lowest class of event that will be
rendered to syslog. It is based on
log.render.level and can be a lower value.
Refer to Basic Logging <level/><change/> and
<render/> on page A-106.
If enabled, the phone's MAC address is prepended
to the log message sent to the syslog server.
Refer to the EM Power parameter in
page 3-7.
Refer to the VLAN Filtering parameter in
Menu on page 3-12.
Refer to the Storm Filtering parameter in
Menu on page 3-12.
Refer to the LAN Port Mode parameter in
Menu on page 3-12.
Refer to the PC Port Mode parameter in
Menu on page 3-12.
Enables the debug serial port.
The default value is 1.
The type of certificate list.
The certificate value.
If set to 1, the phone will attempt to determine its
VLAN ID and negotiate power through LLDP.
If set to 0, the phone will not attempt to determine its
VLAN ID or power management through LLDP.
If set to 1, enable the CLink subsystem when the
Ethernet cable is not attached.
If set to 0, disable the CLink subsystem when the
Ethernet cable is not attached.
Main Menu on
Ethernet
Ethernet
Ethernet
Ethernet