Polycom IP 320 Administrator's Manual page 254

Administrator's Guide for the SoundPoint IP / SoundStation IP / VVX Family
Attribute
qos.ip.rtp.video.max_reliability
qos.ip.rtp.video.min_cost
qos.ip.rtp.video.precedence
Attribute
qos.ip.callControl.dscp
qos.ip.callControl.min_delay
qos.ip.callControl.max_throughput
qos.ip.callControl.max_reliability
qos.ip.callControl.min_cost
qos.ip.callControl.precedence
A - 74
Permitted
Values
0 or 1
0 or 1
0-7
Call Control <callControl/>
These parameters apply to call control packets, such as the network protocol
signaling.
Permitted
Values
0 to 63 or
EF or
any of
AF11,AF12,
AF13,AF21,
AF22,AF23,
AF31,AF32,
AF33,AF41,
AF42,AF43
0 or 1
0 or 1
0 or 1
0 or 1
0-7
Default Interpretation
0 If set to 1, set max-reliability bit in
the IP TOS field of the IP header, or
else don't set it.
0 If set to 1, set min-cost bit in the IP
TOS field of the IP header, or else
don't set it.
5 If set to 1, set precedence bits in the
IP TOS field of the IP header, or
else don't set them.
Default Interpretation
Null This parameter allows the DSCP of
packets to be specified. If set to a
value this will override the other
qos.ip.callControl...
parameters. Default of Null which
means the other
qos.ip.callControl...
parameters will be used.
1 If set to 1, set min-delay bit in the IP
TOS field of the IP header, or else
don't set it.
0 If set to 1, set max-throughput bit in
the IP TOS field of the IP header, or
else don't set it.
0 If set to 1, set max-reliability bit in
the IP TOS field of the IP header, or
else don't set it.
0 If set to 1, set min-cost bit in the IP
TOS field of the IP header, or else
don't set it.
5 If set to 1, set precedence bits in the
IP TOS field of the IP header, or
else don't set them.