Polycom IP 320 Administrator's Manual page 183

<!--
http://www.polycom.com/common/documents/whitepapers/configuration_file
_management_on_soundpoint_ip_phones.pdf -->
<!-- $RCSfile: 000000000000.cfg,v $
<APPLICATION APP_FILE_PATH="sip.ld" CONFIG_FILES="phone1.cfg,
sip.cfg" MISC_FILES="" LOG_FILE_DIRECTORY="" OVERRIDES_DIRECTORY=""
CONTACTS_DIRECTORY="" LICENSE_DIRECTORY="">
<APPLICATION_SPIP300 APP_FILE_PATH_SPIP300="sip_212.ld"
CONFIG_FILES_SPIP300="phone1_212.cfg, sip_212.cfg"/>
<APPLICATION_SPIP500 APP_FILE_PATH_SPIP500="sip_212.ld"
CONFIG_FILES_SPIP500="phone1_212.cfg, sip_212.cfg"/>
<APPLICATION_SPIP301 APP_FILE_PATH_SPIP301="sip_313.ld"
CONFIG_FILES_SPIP301="phone1_313.cfg, sip_313.cfg"/>
<APPLICATION_SPIP501 APP_FILE_PATH_SPIP501="sip_313.ld"
CONFIG_FILES_SPIP501="phone1_313.cfg, sip_313.cfg"/>
<APPLICATION_SPIP600 APP_FILE_PATH_SPIP600="sip_313.ld"
CONFIG_FILES_SPIP600="phone1_313.cfg, sip_313.cfg"/>
<APPLICATION_SPIP601 APP_FILE_PATH_SPIP601="sip_313.ld"
CONFIG_FILES_SPIP601="phone1_313.cfg, sip_313.cfg"/>
<APPLICATION_SSIP4000 APP_FILE_PATH_SSIP4000="sip_313.ld"
CONFIG_FILES_SSIP4000="phone1_313.cfg, sip_313.cfg"/>
</APPLICATION>
Master configuration files contain the following XML attributes:
• APP_FILE_PATH—The path name of the application executable. It can
have a maximum length of 255 characters. This can be a URL with its own
protocol, user name and password, for example
http://usr:pwd@server/dir/sip.ld.
• CONFIG_FILES—A comma-separated list of configuration files. Each file
name has a maximum length of 255 characters and the list of file names has
a maximum length of 2047 characters, including commas and white space.
Each configuration file can be specified as a URL with its own protocol,
user name and password, for example
ftp://usr:pwd@server/dir/phone2034.cfg.
• MISC_FILES—A comma-separated list of other required files. Dictionary
resource files listed here will be stored in the phone's flash file system. So
if the phone reboots at a time when the provisioning server is unavailable,
it will still be able to load the preferred language.
• LOG_FILE_DIRECTORY—An alternative directory to use for log files if
required. A URL can also be specified. This is blank by default.
• CONTACTS_DIRECTORY—An alternative directory to use for user
directory files if required. A URL can also be specified. This is blank by
default.
• OVERRIDES_DIRECTORY—An alternative directory to use for
configuration overrides files if required. A URL can also be specified. This
is blank by default.
Configuration Files
$Revision: 1.21 $ -->
A - 3