Polycom IP 320 Administrator's Manual page 181

Configuration Files
Warning
Note
Note
This appendix provides detailed descriptions of certain configuration files
used by the Session Initiation Protocol (SIP) application. It is a reference for all
parameters that are configurable when using the centralized provisioning
installation model.
This appendix contains information on:
• Master Configuration Files
• Application Configuration
• Per-Phone Configuration
• Flash Parameter Configuration
The application configuration files dictate the behavior of the phone once it is
running the executable specified in the master configuration file.
Configuration files should only be modified by a knowledgeable system
administrator. Applying incorrect parameters may render the phone unusable. The
configuration files which accompany a specific release of the SIP software must be
used together with that software. Failure to do this may render the phone unusable.
In the tables in the subsequent sections, "Null" should be interpreted as the empty
string, that is, attributeName="" when the file is viewed in an XML editor.
To enter special characters in a configuration file, enter the appropriate sequence
using an XML editor:
• & as &
• " as "
• ' as '
• < as &lt;
• > as &gt;
The various .hd. parameters in sip.cfg (such as voice.aec.hd.enable,
voice.ns.hd.enable, and voice.agc.hd.enable) are headset parameters. They
are not connected to high definition or HD voice.
(MAC-address.cfg or 000000000000.cfg)
(sip.cfg)
(phone1.cfg)
A
A - 1