Administrator's Guide for the SoundPoint IP / SoundStation IP / VVX Family
Note
Configuring SoundPoint IP / SoundStation IP / VVX Phones
Locally
4 - 98
•
SIP signaling—when the selected transport protocol is TLS and the server
is configured for Mutual Authentication
•
Syslog—when the selected transport protocol is TLS and the server is
configured for Mutual Authentication
•
Corporate Directory—when the selected transport protocol is TLS and the
server is configured for Mutual Authentication
At this time, the user will not be able to modify or update the digital certificate or the
associated private key stored on the phone during manufacturing.
The Polycom Root CA can be downloaded from
The location of the Certificate Revocation List (CRL)—a list of all expired
certificates signed by the Polycom Root CA—is part of the Polycom Root CA
digital certificate. If Mutual TLS is enabled, the Polycom Root CA must be
downloaded onto the HTTPS server.
At this time, the following operating systems/web servers combinations are
supported:
•
Microsoft Internet Information Services 6.0 on Microsoft Windows
Server 2003
•
Apache v1.3 on Microsoft Windows XP
For more information on using Mutual TLS with Microsoft
Information Services (IIS) 6.0, refer to "Technical Bulletin 52609: Mutual
Transport Layer Security Provisioning Using Microsoft Internet Information
Services 6.0" at
http://www.polycom.com/support/voice/soundpoint_ip/VoIP_Technical
_Bulletins_pub.html
.
A local phone-based configuration web server is available, unless it is disabled
through sip.cfg. It can be used as the only method of modifying phone
configuration or as a distributed method of augmenting a centralized
provisioning model. For more information, refer to
page A-79.
The phone's local user interface also permits many application settings to be
modified, such as SIP server address, ring type, or regional settings such as
time/date format and language.
http://pki.polycom.com
®
Internet
Web Server <httpd/>
.
on
Need help?
Do you have a question about the IP 320 and is the answer not in the manual?