Ram Disk <Ramdisk; Request <Request - Polycom IP 320 Administrator's Manual

RAM Disk <ramdisk/>
Attribute
ramdisk.enable
ramdisk.bytesPerBlock
ramdisk.blocksPerTrack
ramdisk.nBlocks
ramdisk.nBlocks.IP_650
ramdisk.minsize
ramdisk.minfree
Request <request/>
This attribute's settings control the phone's internal RAM disk feature.
Polycom recommends that you do not change these values.
This configuration attribute is defined as follows:
Permitted
Values Default
0 or 1 1
0, 32, 33, ..., 0
1024
0, 1, 2, ..., 0
65536
0, 1, 2, ..., 4096
65536
0, 1, 2, ..., 2048
65536
50 to 16384 50
512 to 16384 3150
This attribute includes:
• Delay <delay/>
Interpretation
If set to 1, RAM disk will be available. The RAM
disk is used to cache downloaded wave files, and
other resources for the user interface.
These four parameters use internal defaults when
value is set to 0.
Note: For the SoundPoint IP 650 phone,
ramdisk.bytesPerBlock is internally replaced by 2X
the value.
Note: For the SoundPoint IP 7000 phone,
ramdisk.bytesPerBlock is internally replaced by 4X
the value.
Smallest size in Kbytes of RAM disk to create
before returning an error. RAM disk size is variable
depending on the amount of device memory.
Minimum amount of free space that must be left
after the RAM disk has been created. The RAM
disk's size will be reduced as necessary in order to
leave this amount of free RAM.
Configuration Files
A - 115