Polycom IP 320 Administrator's Manual page 250

Administrator's Guide for the SoundPoint IP / SoundStation IP / VVX Family
Attribute
video.profile.H2631998.annexT
video.profile.H2631998.annexK
video.profile.H2631998.annexN
Attribute
video.camera.
flickerAvoidance
video.camera.frameRate
video.camera.brightness
video.camera.saturation
A - 70
Permitted
Values
0 or 1
default Null
0 or 1 (default),
2, 3, 4
0 or 1 (default),
2, 3, 4
Camera Controls <camera/>
These settings control the performance of the camera.
These configuration attributes are defined as follows:
Permitted
Values Default
0 to 2 Null
5 to 30 frames Null
per second
0 to 6 Null
0 to 6 Null
Interpretation
This value is H263-1998/90000 format
parameter ANNEXT used to signal
Polycom VVX 1500 receiving capability in the
SDP.
This value is H263-1998/90000 format
parameter ANNEXK used to signal
Polycom VVX 1500 receiving capability in the
SDP.
This value is H263-1998/90000 format
parameter ANNEXN used to signal
Polycom VVX 1500 receiving capability in the
SDP.
Interpretation
Set flicker avoidance.
If set to 0 or Null, flicker avoidance is automatic.
If set to 1, 50hz AC power frequency flicker
avoidance (Europe/Asia).
If set to 2, 60hz AC power frequency flicker
avoidance (North America).
Set target frame rate.
Values indicate a fixed frame rate, from 5 (least
smooth) to 30 (most smooth).
If set to Null, the value 25 is used.
Set brightness level.
The value range is from 0 (Dimmest) to 6
(Brightest).
If set to Null, the value 3 is used.
Set saturation level.
The value range is from 0 (Lowest) to 6 (Highest).
If set to Null, the value 3 is used.