Polycom IP 320 Administrator's Manual page 303

Attribute
apps.telNotification.URL
apps.telNotification.
incomingEvent
apps.telNotification.
outgoingEvent
apps.telNotification.
offhookEvent
apps.telNotification.
onhookEvent
Attribute
apps.statePolling.URL
apps.statePolling.
username
apps.statePolling.
password
Telephone Notification <telNotification/>
This configuration attribute is defined as follows:
Permitted Values
URL
0 or 1
0 or 1
0 or 1
0 or 1
State Polling <statePolling/>
This configuration attribute is defined as follows:
Permitted Values
URL
string
string
Default Interpretation
Null The URL to which the phone sends notifications
of specified events. The protocol used can be
either HTTP or HTTPS.
0 If set to 0, incoming call notification is disabled.
If set to 1, incoming call notification is enabled.
0 If set to 0, outgoing call notification is disabled.
If set to 1, outgoing call notification is enabled.
0 If set to 0, offhook notification is disabled.
If set to 1, offhook notification is enabled.
0 If set to 0, onhook notification is disabled.
If set to 1, onhook notification is enabled.
Default Interpretation
Null The URL to which the phone sends call
processing state/device/network information.
The protocol used can be either HTTP or
HTTPS.
Note: To enable state polling, the attributes
apps.statePolling.URL,
apps.statePolling.username, and
apps.statePolling.password must be set to
non-Null values.
Null The user name to access the state polling URL..
Null The password to access the state polling URL.
Configuration Files
A - 123