Tones <Tones - Polycom IP 320 Administrator's Manual

Administrator's Guide for the SoundPoint IP / SoundStation IP / VVX Family
Attribute
up.manualProtocolRouting.
softKeys
up.callTypePromptPref
up.enableCallTypePrompt
Tones <tones/>
A - 34
Permitted
Values
0 or 1
0 or 1
0 or 1
This attribute describes configuration items for the tone resources available in
the phone.
This attribute includes:
• Dual Tone Multi-Frequency <DTMF/>
• Chord-Sets <chord/>
Default Interpretation
1 If set to 1 and up.manualProtocolRouting is
set to 1, soft keys are used to provide the user
with a routing choice.
If set to 0, a routing confirmation dialog is
presented with a choice for each possible
routing.
Note: This parameter is supported on the
Polycom VVX 1500 only.
1 A flag to determine which interface is used to
place calls.
If set to 1 or Null, the voice interface is used.
If set to 0, the video interface is used to place
calls during hot-dialing or if the use presses
the off-hook key on the SoundStation IP 7000
phone.
Note: This parameter is supported on the
SoundStation IP 7000 only.
1 Enable the call type prompt.
If set to 1 or Null, the call type prompt is
enabled.
If set to 0, the call type prompt is disabled.
Note: This parameter is supported on the
SoundStation IP 7000 only.