Idle Display Animation - Polycom IP 320 Administrator's Manual

Administrator's Guide for the SoundPoint IP / SoundStation IP / VVX Family
Central Configuration file:
sip.cfg
(provisioning
server)
Local Web Server
(if enabled)
Local Phone User
Interface

Idle Display Animation

Note
4 - 16
of several different formats and can be turned off. The SoundPoint IP 32x/33x
and IP 4xx phones have a limited selection of date formats due to a smaller
display size.
Configuration changes can be performed centrally at the provisioning server
or locally:
Turn time and date display on or off.
• For more information, refer to
A-31.
Set the time and date display formats.
• For more information, refer to
A-31.
Set the basic SNTP settings and daylight savings parameters.
• For more information, refer to
page A-75.
Set the basic SNTP and daylight savings settings.
Navigate to: http://<phoneIPAddress>/coreConf.htm#ti
Changes are saved to local flash and backed up to <Ethernet
address>-phone.cfg on the provisioning server. Changes will
permanently override global settings unless deleted through the
Reset Local Config menu selection and the <Ethernet
address>-phone.cfg is removed from the provisioning server.
The basic SNTP settings can be made in the Network Configuration
menu.
For more information, refer to
page 3-2.
The user can edit the time and date format and enable or disable the
time and date display under the Settings menu.
Changes are saved to local flash and backed up to <Ethernet
address>-phone.cfg on the provisioning server. They will permanently
override global settings unless deleted through the Reset Local
Config menu selection.
All phones can display a customized animation on the idle display in addition
to the time and date. For example, a company logo could be displayed (refer
to Adding a Background Logo
Currently customized animations are not supported on the Polycom VVX 1500.
User Preferences <up/>
Date and Time <datetime/>
Time Synchronization <sntp/>
DHCP or Manual TCP/IP Setup
on page C-6).
on page
on page
on
on