Polycom IP 320 Administrator's Manual page 323

Attribute
divert.fwd.x.enabled
Attribute
divert.busy.x.enabled
divert.busy.x.timeout
divert.busy.x.contact
Forward All <fwd/>
This configuration attribute is defined as follows:
Permitted
Values Default
0 or 1 1
Busy <busy/>
Calls can be automatically diverted when the phone is busy.
Permitted Values
0 or 1
positive integer
ASCII encoded string
containing digits (the user part
of a SIP URL) or a string that
constitutes a valid SIP URL
(6416 or 6416@polycom.com
Interpretation
If set to 1, the user will be able to enable universal call
forwarding through the soft key menu.
Note: If server-based call forwarding is enabled, this
parameter is enabled.
Default Interpretation
1 If set to 1, calls will be
forwarded on busy to the
contact specified below.
Note: If server-based call
forwarding is enabled, this
parameter is disabled.
60 Time in seconds to allow
altering before initiating the
diversion.
Null Forward-to contact for calls
forwarded due to busy status, if
Null, divert.x.contact will be
used.
Configuration Files
A - 143