Polycom IP 320 Administrator's Manual page 212

Administrator's Guide for the SoundPoint IP / SoundStation IP / VVX Family
Attribute
up.welcomeSoundEnabled
up.welcomeSoundOnWarmBootE
nabled
up.localClockEnabled
up.backlight.onIntensity
up.backlight.idleIntensity
up.toneControl.bass
up.toneControl.treble
up.audioSetup.auxInput
up.audioSetup.auxOutput
up.idleTimeout
A - 32
Permitted
Values Default
0 or 1 1
0 or 1 0
0 or 1 1
0 (off), Null
1 (low),
2 (medium), 3
(high)
0 (off), Null
1 (low),
2 (medium), 3
(high)
-4 to 4, Null 0
-4 to 4, Null 0
0 - Other Null
Input,
1 - Polycom
Wireless Mic,
2 - off
0 - Other Null
Input,
1 - Polycom
Wireless Mic,
2 - off
positive Null
integer,
seconds
Interpretation
If set to 1, play welcome sound effect after a
reboot.
If set to 1, play welcome sound effect on warm
and cold boots.
If set to 0, only a cold reboot will trigger the
welcome sound effect.
If set to 1, display the date and time on the idle
display.
This parameter controls the intensity of the
LCD backlight when it turns on during normal
use of the phone.
The default value is medium.
This parameter controls the intensity of the
LCD backlight when the phone is idle.
The default value is low.
Note: If idleIntensity is set higher than
onIntensity, it will be replaced with the
onIntensity value.
Bass equalization control.
Each step is an increment of 1 dB at 225 kHz
and 2 dB < 225 Hz.
Treble equalization control.
Each step is an increment of 1 dB at 3.7 kHz
and 2 dB > 10 kHz.
Auxiliary audio input.
If set to Null, default value is 2.
Auxiliary audio output.
If set to Null, default value is 2.
Timeout for the idle display or default call
handling display.
If set to 0, there is no timeout.
If set to Null, the default timeout of 40 seconds
is used.
If set to value greater than 0, the timeout is for
that number of seconds (maximum 65535).